Related tutorials

Zorro software use tutorial introduction

 

New machine with one button:

Note: The machine can not exist at the same time other similar functional tools, there will be conflicts, please uninstall, then install Zorro.

Zorro basic use instructions

 


For first use, click first use. First click "Application List" to select and configure the application. Then go to select and configure the application and go to the following interface. Click select and configure the application you want to operate on. Check the box once and it is black to indicate that only the new machine will not be backed up. Check the box twice and apply the name red to indicate that the new machine will be backed up

 

 


Setting positioning and random IP:

When using zorro one-click machine to operate the project, positioning camouflage, random positioning or manual self-selection positioning and random IP setting may be needed for different applications. Here are some instructions for operating Zorro for manual positioning and random IP.

Preparation:Apple phone jailbreak, install Zorro, and carry out the necessary Settings, configure [application list], [function selection] Zorro software upper right corner [Settings] [random parameters] [cleaning parameters] and other Settings.

Code of conduct: To conduct a new machine with one key, please set the positioning and IP and then conduct a comprehensive cleaning (new machine with one key)

Setting and positioning operation:[Setting] There is [positioning management]

I. Random location -- IP location

1. {positioning open} is the master switch -- positioning switch. If you need zorro to operate the positioning of the target application, the master switch should be turned on, and the positioning of the phone itself (setting -> privacy-> positioning) should also be turned on to enable zorro positioning to take effect;

2, {in accordance with the IP position} is according to your location on the IP or proxy IP, such as you use a Shanghai mobile phone card, so mobile IP flow used in most cases will be in Shanghai, this {in accordance with the IP position} under the condition of open, the positioning of the target application will be IP position somewhere in Shanghai, there are instructions below according to the IP of the location and treatment methods.

Second, manual positioning - city optional positioning

1. {positioning open} is the master switch -- positioning switch. If you need zorro to operate the positioning of the target application, the master switch should be turned on, and the positioning of the phone itself (setting -> privacy-> positioning) should also be turned on to enable zorro positioning to take effect;

2, {IP positioning} close, at this time is a manual positioning, click {city positioning} enter or zorro home page authorization date above the icon enter positioning, note: select a bit smaller, specific position, reduce to 100 meters.

Another: Zorro home authorization date above the icon can be used to restore the backup after positioning changes.


Set up random IP operation:

There are two methods to handle random IP: [Mobile phone data card + open intelligent flight mode] [WiFi+ third-party agent IP]


 

I. Mobile phone data card + open intelligent flight mode

Phone into traffic or usual can connect to the Internet telephone CARDS, pictured above, under the set {} here find advanced plug-in intelligent flight mode and open, so that each operation comprehensive cleaning (a new) will be opened the flight mode and close the flight mode to change the IP, but this method has a drawback, because general traffic card or phone card IP basic are the same city, when you are set in accordance with the IP position does not meet national orientation.

Ii. WiFi+ third-party agent IP

You need to buy third-party agent IP, such as Shell Agent IP or Infinite Ios agent

 

Software export and import:

 

Operate the export on the mobile phone, select separate export, then connect to the computer, find the corresponding path with the aid of ace assistant, and export to the computer. Then put into the folder of import path, the mobile terminal operation import.

Export operation:Zorro software -> sets -> import and export function (as shown in the figure below), operate the export on the mobile terminal, select separate export, then connect the mobile phone to the computer, open the aisi assistant software, find the backup path, and export to the computer.

As shown in the figure below, after the mobile phone operation exported the backup records, it opened the zorro_out directory with the computer version of AIsi Assistant to see the export file.

 


Import operation:Connect the mobile phone to the computer, open Ace Assistant, import the exported backup file into the import path, and import it into the mobile phone terminal operation.

Backup path: /var/mobile/Media/ZORRO

Export path: /var/mobile/Media/zorro_out

The import path:/var/mobile/Media/zorro_in

Uninstall Zorro, backup files will not be lost, problems can be uninstalled reinstall.

Note: check the directory with aisi assistant first. If there is no zorro_in directory with the path above generated, click file management in Zorro setting function first, then refresh the directory, and there will be Zorro_in folder generated.

If too many exports fail at once, try exporting a small number of times.